Signature Structures, LLC requested our partnership for a practice facility of a Philadelphia Football team facility that needed replacement of outer fabric and inner liner fabric for a steel frame supported tensioned fabric structure (measurements: 200 ft wide by 280 ft long, with 26 ft tall sidewalls and an arched roof). For logistical and scheduling reasons, the inner liner replacement was done first, and before the new liner was installed, new fiberglass insulation was placed in the cavity. The existing fabric system for both the liner and outer fabric was a large panel system, tensioned with pipes and pockets. The customer requested color stripes every 20 ft up and over the roof for the outer fabric.
One of the many parts of the $61.6 million dollar renovation and improvements to the water system on Penn State University’s main campus in State College, Pennsylvania, included replacing a large water tower. The 140-foot tower, which supplies water to the campus’s dorms and other buildings, is part of a system that uses over 550 million gallons per year. Construction of the new water tower on the northern section of campus, which began in 2015 and finished in the summer of 2017, includes the addition of a unique shade structure from Serge Ferrari.
We are proud to announce the second anniversary of our new abraiding machine that is specially designed for and certified by Serge Ferrari for use on the TX-30 topcoat architectural fabrics!
TX-30 topcoats are top of the line finishes for architectural fabrics, using cross-linked PVDF. Since the topcoat is not weldable, the abraiding machine is used to remove the topcoat in areas require overlap for welds. The abraided areas are covered by the overlapping fabric so the resulting fabric panel has the TX-30 topcoat over its entire surface.